In a plant that is washed down every day, the stainless steelwork is part of the hygiene system. We make 316 drainage, tables, platforms and frames with continuous TIG welds, falls that drain properly, and parts that lift out for cleaning.
316 trench with falls, welded outlets and removable grating. We made 180 m for Baladi Poultry.
Stainless work tables, benches and racks made to your layout.
Stainless access and handrail for wash-down areas, where mild steel and 304 don't last.
Equipment frames, guards, covers and supports, cut and formed to drawing.
Folded stainless panels and trims with rounded corners that are easy to clean.
We install finished sections and level them on site, so the plant stops for less time.
| Item | Typical reference | Read more |
|---|---|---|
| Grade | 316 for chlorinated wash-down, 304 for dry areas | 304 vs 316 and finishes |
| Surface finish | Ra 0.8 µm is usual for product contact | Hygienic fabrication |
| Welds | Continuous, ground flush, TIG | Welding quality |
| Certificates | EN 10204 type 3.1 | Certificates explained |
| Post-weld treatment | Pickling or passivation if the spec asks for it | Hygienic fabrication |
Drawings, a BOQ or a sketch, plus the standards and documents your project needs.
We tell you what we can supply and point out anything missing from the drawings before we start.
Cutting, forming, welding and finishing in our workshop, then installation by our crews or delivery to your contractor.
Yes. The whole Baladi trench was 316, because chlorinated wash-down attacks 304 over time.
Yes. Send the layout or drawings with drain, outlet and equipment positions.
We fabricate in the workshop and install finished sections, so time on site is short. Tell us your shutdown window in the RFQ.
Material certificates such as EN 10204 type 3.1. Tell us what your audit needs and we'll confirm.
Drawings, a BOQ, your inspection and test plan, or just a sketch. We reply within one business day.
Want a checklist first? Use the RFQ builder