CNC fiber laser cutting of steel, stainless and aluminium on a 6000 × 2500 mm bed with a 20 kW source — mild steel to 40 mm, stainless to 30 mm, aluminium to 25 mm. Clean edges, tight nesting, no secondary finishing on most parts. For contractors, fabricators and factories across Riyadh and Saudi Arabia.
A 20 kW source on a full-sheet bed means we cut thick plate and thin sheet on the same machine, so a job with mixed thicknesses does not get split across suppliers.
Laser is the right choice when the edge matters. On most thicknesses the cut comes off ready to weld or coat with no grinding, which is where the time saving actually lands — not in the cutting, but in everything you do not have to do afterwards.
| Material | Max thickness | Edge quality | Notes |
|---|---|---|---|
| Mild steel | 40 mm | Clean, weld-ready | Oxide-free on thin gauge |
| Stainless 304 | 30 mm | Bright cut | No heat tint on most gauges |
| Stainless 316 | 30 mm | Bright cut | For wet and coastal work |
| Aluminum | 25 mm | Clean | Slower than steel at thickness |
| Galvanized sheet | 6 mm | Clean | Coating intact away from the kerf |
| Brass & copper | 12 mm | Clean | Reflective — quoted per job |
Connection steelwork cut and holed in one operation, ready to weld into a frame.
Decorative and perimeter screens cut from your artwork in sheet or plate.
Spigot plates, channel brackets and post caps for our own railing systems.
Repeat parts nested tight so a run of forty costs closer to a run of four.
Thin-gauge parts where a punched edge would not be accurate enough.
Cut lettering and panels in steel, stainless or aluminum.
Laser cutting is priced by material, thickness, cut length and quantity — and repeat parts nested together drop the per-part price sharply (a run of forty costs closer to a run of four). Send a DXF and we return a price and lead time in one reply. No minimum order for trade accounts.
Mild steel up to 40 mm, stainless steel up to 30 mm, and aluminium up to 25 mm, on a 6000 × 2500 mm fiber laser bed with a 20 kW source. We also cut brass and copper.
Yes — CNC laser cutting for contractors, fabricators and facilities across Riyadh and Saudi Arabia, from one-off parts to production runs, cut-only or cut-and-fabricated.
DXF, DWG or STEP for cut parts, PDF for assemblies. A sketch or photo is enough to start. Every file is reviewed for manufacturability before we quote.
Yes — we bend, machine and weld in-house, so you can order a finished part or assembly, not just cut blanks. See all fabrication processes.
DXF, DWG or STEP for cut parts. PDF for fabricated assemblies. If you only have a sketch or a photo of the part, send that — we will tell you what else we need.